What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 15:14

Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Here is a simplified AC power diagram.
Andy Bogard's Fatal Fury: City of the Wolves gameplay trailer revealed, releases June 24 - EventHubs
He then describes Rainy Season and Lightning.
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
Edit 2024–10.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
How did my ex move on very fast?
He then asserts :
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
watchOS 26 preview: 5 new Apple Watch features I can’t wait to try - Tom's Guide
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
It seems Mohan does not understand the difference between a comment and an Answer.
the problem then depends on "how fast does the fuse operate?".
Having Low Levels Of This Vitamin Can Cause Dry Eyes. Are You Getting Enough? - Women's Health
This one hit behind the barn.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Do you think the constitution and laws should be taught in school?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One
When was you wife swapping fantasy started?
There are two important concepts here.
but this device (an Inductor) … impedes the rapid changes in the current.
But it can get overloaded, and no longer works.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But… the neutral is now “floating” because of the 1 ohm resistance.
I post the exact comment here.
7 Surprising Home and Garden Mistakes That Could Be Making Your Allergies Worse - Yahoo
A circuit breaker is similar, but is resettable.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
eight
How do I get my body in shape?
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
At one ohm, the resistor has a maximum of 1 watt power.
How would you describe modern day Russian society, beyond just politics?
These devices are installed between the “hot” and “neutral” and protective ground.
These are simplified answers to the original question, and does not change anything I wrote above.
What is lightning?
At least they know the answer if they wanted it.
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–16 [ OO OLAOYE OYEBODE ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
(Dc diagram shown, AC is similar).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
nine
There are three different concepts here that are getting confused.
Barnstars:
This device then solves the entire problem.
What does a fuse do?
but I think this circuit , shows a few more pieces.
An AC voltage/ current source, and an ac inductive load.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
First Sentence:
It also is a device that limits the change in current flow.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
a photo is worth a thousand words.
2024–10–10[John johnson John Johnson ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
In schematic diagrams this is the symbol for a fuse:
This is 'the assistant's answer'
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where this question deviates from being a 'generic' question, and becomes more specific.
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
A fuse is a non-resetable over current circuit protector.
This is where the MOV conducts again, and dissipated the energy.
[image of Common-mode choke]
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
what exactly is a ‘surge’ protector?
One is “what exactly is in a ‘surge protector’ ? ”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.